Industrial Grade Calcium Chloride Dihydrate - CaCl₂·2H₂O, CAS 10035-04-8, EINECS 233-140-8 - is a granular salt assaying 74–77% CaCl₂. Two opposite duties account for most of the tonnage sold: driving ice off a surface, and drawing moisture out of the air. Both rest on one habit of the material - it wants water, and it warms as that water arrives.
For ice, it goes onto carriageways, ramps and loading bays, and keeps working at temperatures where sodium chloride has already quit. For moisture, it is hung inside containers, packed beside machinery or sprayed over stockpiles, pulling vapour from the air or leaving a damp film that stops dust from lifting.
Three cuts leave the plant - fine powder, granules and flakes. Which one you take is settled by how the material is dosed, not by price: a spreader, a mixing tank and a desiccant pouch each want a different geometry.
Advantage
Stable Assay
Each lot is checked for calcium chloride content of 74% or above, so dosing figures hold steady from one delivery to the next.
Low Insoluble Content
Insolubles are held to a tight limit, which reduces sediment build-up inside mixers, pipelines and spray nozzles.
Quick Solubility
The crystals take up water fast and leave a clear liquid, cutting the mixing time before a batch is ready.
Wide Material Compatibility
It stays stable in contact with polyethylene, GRP and rubber-lined steel, so most handling and containment setups suit it.
Product Parameters
| Test Item | Specification | |
|---|---|---|
| CaCl₂ content | 74.0 – 77.0% | |
| Appearance | White to off-white solid | |
| Alkalinity (as Ca(OH)₂) | ≤ 0.20% | |
| NaCl | ≤ 3.0% | |
| MgCl₂ | ≤ 0.50% | |
| Water insoluble matter | ≤ 0.10% | |
| Sulfate (as CaSO₄) | ≤ 0.10% | |
| Iron (Fe) | ≤ 0.005% | |
| pH (5% solution) | 8.0 – 10.0 | |
Applications
Removing ice
- Carriageways, bridge decks and ramps - applied before or after snowfall, it melts through and leaves a brine film that resists refreezing.
- Yards, docks and loading bays - keeps forklift routes and trailer aprons open where traffic cannot stop for a thaw.
- Blended with grit or rock salt - stretches coverage and lowers the working temperature of the mix.
Holding or removing moisture
- Container desiccant - hung as pouches so cargo, tooling and packed steel arrive without condensation damage.
- Machine and spares preservation - placed in crates and enclosures to keep enclosed air dry.
- Stockpile and haul-road spray - holds a moisture film that keeps fines from becoming airborne.
Process duties
- Cold-weather concrete - shortens setting time so placement can continue in low temperatures.
- Drilling and completion fluids - builds a dense brine with a low freezing point.
- Refrigeration circuits - carries heat as a secondary refrigerant in cold stores.
- Water treatment - adjusts calcium hardness and mineral balance.
Packaging & Logistics
Packaging
- 25kg bags (PE/PP woven bags)
- 5kg / 10kg / 20kg bags available on request
- 1000kg / 1250kg jumbo bags (industrial bulk)
- OEM packaging supported (logo, design, private label)
Shipping
- Sea freight (FCL / LCL bulk orders)
- Air freight (small urgent orders)
- Land transport (regional delivery)
Delivery Time
- Sea freight: 20–35 days depending on destination
- Air freight: 5–10 days for urgent orders
![]() |
![]() |
Why Choose Us
- Mixed consignments. Two or three cuts can share one container, so a new size can be trialled without committing to a full box.
- Assay kept inside a narrow band. Every lot sits within 74–77% and leaves with its own certificate, so dosing calculations hold from one delivery to the next.
- Cut verified by sieve, not by eye. Oversize and undersize are measured and reported; the bag does not conceal a fraction that only appears at the spreader.
- Load weight settled before booking. We quote the tonnage a given cut and packing will actually yield, so the freight invoice and the packed weight agree.
- Winter allocation for repeat buyers. Volumes are reserved ahead of the cold season instead of being chased on the spot market in January.
- Paperwork issued for the lot, not the product. Certificate, data sheet and safety sheet carry the batch that sits in the container.
- Candour about limits. Chloride attack on steel, caking in damp stores, segregation in dry blends - these are stated before the order, not argued after it.

FAQ
Q: Items requirement
A: Please provide us the Qty, Size, Color, Package, Material of your customized items . Then we will depend on your requirement to quote. We also can depend on your artwork to make design sketch for you to reference.
Q: Sample charge and time
A:If you need our existing samples, we can provide it for free, But pls pay the express charge by yourself. (2). If you need make your own design, Please let us know. The sample time is 5-7 days
Q: How many tonnes fit in a container?
A: About 20–25 MT in a 20' GP, depending on form. Granular loads heaviest; flake and powder are bulkier and take fewer tonnes. We confirm the figure for your order before booking, so the freight quote and the packed weight agree.
Q: How should it be stored on site?
A: Sealed, under cover, off the ground and away from steam or wash-down. The material is strongly hygroscopic and will cake, then deliquesce, if a bag is left open or a pallet stands against a damp wall. Opened bags should be closed again or used promptly.
Q: Are you a trading company or a manufacturer?
A: We are a trading company.
Hot Tags: bulk wholesale dihydrate calcium chloride, China bulk wholesale dihydrate calcium chloride manufacturers, suppliers, factory, 25kg calcium chloride package, calcium chloride desiccant, calcium chloride for dust control, calcium chloride powder offers, dust control chloride, granular calcium chloride

