Aluminium Sulfate - Al₂(SO₄)₃·18H₂O, CAS 7784-31-8, EINECS 616-524-3 (anhydrous basis CAS 10043-01-3, EINECS 233-135-0) - is a white to off-white solid carrying 15.5–17% Al₂O₃. It is dosed into water to gather suspended solids, colour and phosphate into flocs that settle out or float to the surface.
What buyers tend to underestimate is the second half of the reaction. The salt does not react with dirt alone; it also reacts with the bicarbonate already dissolved in the water. Every milligram per litre dosed spends roughly 0.45 mg/L of alkalinity, measured as CaCO₃. In a soft supply, or at a works already running near the lower pH limit, that is enough to take the water past the point where flocs form properly - and the coagulant usually gets the blame.
So the figure worth knowing before choosing a grade is not only Al₂O₃ and iron. It is the alkalinity of the water being treated, and whether the dose fits inside it. Supplied as flakes, granules, powder or liquid.
Advantage
Stable Al2O3Al2O3 Content (16–17%)
Consistent aluminium oxide content across every batch, ensuring accurate coagulant dosing and predictable treatment results.
Paper Sizing Aid
Paired with rosin size, it fixes the size onto pulp fibres and raises the water resistance of paper and board.
Mordant for Dyeing
It helps dye attach to the fibre and gives deeper, more even shades in textile dyeing and printing.
Soil pH Correction
Spread on alkaline ground, it lowers pH so acid-loving plants can take up nutrients properly.
Product Parameters
|
Applications
- Drinking water works. Coagulates turbidity, colour and organic matter ahead of settling and filtration.
- Municipal and industrial effluent. Drops out phosphate and residual solids; also used to condition sludge before dewatering.
- Paper mills. Sets rosin size on the fibre and helps retain fines in the sheet.
- Pigment and whitening work. Lays an alumina film on titanium dioxide particles; the low-iron grade is specified here because iron discolours the finished pigment.
- Dyehouses. Acts as a mordant so dye fixes to the fibre rather than washing out.
- Tanneries. Used in the early stages of leather processing to prepare the hide.
- Shotcrete and cold-weather concrete. Accelerates setting where placement cannot wait.
- Horticulture. Acidifies growing media; also used where a blue flower colour is wanted in hydrangea.
Packaging & Logistics
Packaging
- 25kg bags (PE/PP woven bags)
- 5kg / 10kg / 20kg bags available on request
- 1000kg / 1250kg jumbo bags (industrial bulk)
- OEM packaging supported (logo, design, private label)
Shipping
- Sea freight (FCL / LCL bulk orders)
- Air freight (small urgent orders)
- Land transport (regional delivery)
Delivery Time
- Sea freight: 20–35 days depending on destination
- Air freight: 5–10 days for urgent orders
![]() |
![]() |
Why Choose Us
Large Production Capacity
Annual capacity reaches 100,000–150,000 tons, supporting a stable bulk supply for key chemical products.
Exported to 78 Countries Worldwide
We have supplied 489+ B2B buyers across 78 countries, with proven global shipping and trade experience.
ISO Certified Quality Management System
Production follows ISO9001, ISO22000, and ISO45001 standards, with SGS and TUV testing for quality consistency.
Professional Export Team Support
Our 20+ member foreign trade team ensures fast response, technical support, and full pre-sales and after-sales service.

FAQ
Q: Should I specify 15.5% or 17% Al₂O₃?
A: Specify what your process needs and compare delivered cost per tonne of Al₂O₃, not per tonne of bag. A higher-assay material costs more per tonne but delivers more active coagulant and less inert weight to freight.
Q: When do I need the low-iron grade?
A: Wherever iron would show in the product - pigment coating, white paper, whitening work. For effluent and most drinking-water duty the standard grade performs the same coagulation at a lower price.
Q: Solid or liquid - which suits us?
A: Liquid removes the dissolving step and the dust, but you pay to ship water and the product has a shorter life. Solid suits works with storage space and a make-up tank; liquid suits plants with frequent small doses and no labour for bag handling.
Q: How much will it pull down my pH?
A: Budget about 0.45 mg/L of alkalinity as CaCO₃ for every 1 mg/L of alum dosed. Whether pH actually falls depends on how much bicarbonate the water carries. At 20 mg/L dose on a water with 60 mg/L alkalinity, roughly 9 mg/L is spent and the buffer absorbs it; on a water with 25 mg/L, the same dose takes a third of the buffer and pH will move.
Q: What is your minimum order quantity (MOQ)?
A: MOQ depends on the packaging type and destination. We support flexible bulk orders for distributors and project buyers.
Hot Tags: 16% 17% aluminum sulfate, China 16% 17% aluminum sulfate manufacturers, suppliers, factory

