15% Calcium Chloride Ice Melt

Send Inquiry
15% Calcium Chloride Ice Melt
Details
•Basic Information
CAS NO.: 10043-52-4
EINECS NO.: 233-140-8
Purity: 99%
Molecular Formula: CaCl₂·2H₂O
Grade: Industrial grade

•Packages
25 or 50 kg polyethylene (PE) & polypropylene (PP) bag
1000 or 1250 kg innerlining polypropilen (PP) big bag

•Services
Sample: We offer 300g of free samples. You only need to bear the express delivery fee.
OEM: Customized packaging marks, customer logos, trademarks, and weight per bag.
Category
Snow Melting Agent
Share to
Description

15% Calcium Chloride Ice Melt is an economy blend: a sodium chloride base carrying fifteen percent calcium chloride dihydrate, granulated to 1–4 mm and treated so the bag stays free-flowing on the shelf.

 

The ratio is deliberate rather than a compromise. Fifteen percent is enough calcium to start melting on contact and keep a treated surface clear through an ordinary winter night, and small enough that the price stays near that of plain rock salt. What the buyer gains over rock salt is the exothermic start - the granule warms the film it dissolves in, so action begins immediately instead of after the ice softens - and a floor a few degrees lower than salt alone.

 

What the buyer does not gain is arctic performance. This is the grade for a winter that is mostly moderate, where a cold snap is answered by a second pass rather than by a more expensive granule in the bag.

 

Advantage

Quicker Start Than Plain Salt

With 15% calcium chloride in the mix, melting begins on contact, while the salt portion on its own would wait for moisture to form brine.

Even Coating Through the Load

Each granule carries a similar share of the active salt, so the last bag in the pallet behaves much like the first one opened.

Cleaner Handling, Less Dust

The coating holds fines down, which keeps bags, pallets and loading areas tidier and reduces dust for the crew.

No Changes to Spreading Gear

Granules run through existing salt spreaders, augers and hoppers without adjustment, so crews keep the equipment they already use.

 

Product Parameters

 

Component Share Note
Calcium chloride, as dihydrate 15% The melting component
Sodium chloride balance Carries the bulk and the cost advantage
Magnesium chloride 0 – 5% Optional; extends the working floor slightly
Anti-caking agent trace Keeps retail bags free-flowing
Moisture ≤ 1.0% Lower than bulk blends; retail bags must not cake
Water-insoluble matter ≤ 1.5% -
Granule size 1 – 4 mm Screening sets the spreader and shaker behaviour
pH, 10% solution 6.0 – 10.0 -

 

 

Applications

 

 

 

  • Driveways and front steps. The household case: a scattered application clears a car length of drive before the household leaves for work.
  • Public footpaths and delivery routes. Keeps the postman's line and the courier's approach walkable through a normal winter morning.
  • Shopfronts and forecourts. Retail premises need the entrance dry by opening time, not the whole street cleared.
  • Property and school grounds. Walkways between buildings, where the same path is treated repeatedly rather than once.
  • Accessible ramps and handrail approaches. Applied by hand and judged by whether a wheelchair or a walking frame can pass.
  • Fuel stations and car wash aprons. Wet traffic at freezing point, all day, on a small area.
  • Temporary site walkways. Where a contractor needs a safe route for a few weeks and will not buy a premium grade for it.

 

 

Packaging & Logistics

 
 

Packaging

  • 25kg bags (PE/PP woven bags)
  • 5kg / 10kg / 20kg bags available on request
  • 1000kg / 1250kg jumbo bags (industrial bulk)
  • OEM packaging supported (logo, design, private label)
 
 
 

Shipping

  • Sea freight (FCL / LCL bulk orders)
  • Air freight (small urgent orders)
  • Land transport (regional delivery)
 
 
 

Delivery Time

  • Sea freight: 20–35 days depending on destination
  • Air freight: 5–10 days for urgent orders
 

 

5 baiduimg.webp
 

Why Choose Us

 

  • Granule size proven by sieve report. Each lot ships with the distribution, so the spreader pattern can be set before the truck leaves the yard.
  • Dilution and refreeze data supplied. The curves behind the rate table go to the buyer, so the gritting plan is built on the product's behaviour rather than on a supplier's claim.
  • Blend set to the destination climate. Tell us the port and the winter it serves; the ratio is fixed for that market rather than for a generic catalogue.
  • Trial quantities accepted. A first order can be sized to one storm's use, so the ratio is tested before a season is committed.
  • Third-party testing on request. Independent laboratory analysis can accompany the shipment where a tender requires it.
  • Production slot held ahead of the cold season. Contract volume is scheduled in advance instead of being rationed in the first cold week.
  • Local restrictions flagged. Catchment areas, chloride-free zones and steel-adjacent structures are raised before the order, not after the delivery.
baiduimg.webp
 

FAQ

 

Q: Is 15% enough for my winter?

A: For a winter that mostly sits between 0 and -10 °C, yes, at the stated rate. Below about -12 °C it slows down and needs a heavier application or a second pass. If your site regularly runs colder than that, take a higher-calcium blend - this grade will disappoint you there, and no application rate fixes a ratio.

Q: The quotation says 15% - 15% of what?

A: That is the question to ask first. Fifteen percent expressed as the dihydrate carries only about 11.3% CaCl₂; fifteen percent expressed as anhydrous CaCl₂ is about 19.9% dihydrate, roughly a third more calcium in the bag. Ask for the basis on the certificate before comparing prices.

Q: Why does it cost more than rock salt if it is mostly salt?

A: Because of the calcium fraction, which is the part that starts the melt on contact and lowers the working floor. You are paying a small premium for speed and for a few degrees of range, not for a different product category.

Q: Does it really work at -20 °C?

A:The calcium chloride fraction does; the sodium chloride in the blend contributes very little at that temperature. That is why the ratio matters - a 30% CaCl₂ blend at -20 °C is mostly inert weight, while a 70% blend still melts.

Q: How much should we spread?

A: Rate depends on ice thickness, surface, traffic and temperature, and it is normally set by the highway authority's own specification. As a starting point, pre-wetting and a uniform 1–6 mm cut usually allow a lower rate than dry rock salt; we can supply the blend's data sheet for your gritting plan.

 

 

 

 

 

 

 

Hot Tags: 15% calcium chloride ice melt, China 15% calcium chloride ice melt manufacturers, suppliers, factory

Send Inquiry